AR26.45-B-0002TC | Remove/install hydraulic pump | 12.02.16 |
Manual transmission 715.372, 715.504, 715.517, 715.527, 715.531, 715.567, 715.568, 715.576
Manual transmission 715.563 with Vehicle 693
Manual transmission 715.565 with Vehicle 693
W26.45-0064-11
1 Hydraulic pump
2 Nut
3 Sealing gasket
4 Intermediate flange
| Remove and install | ||
Danger! | Risk of injury on skin and eyes by ejected high pressure hydraulic fluid. Risk of poisoning by ingestion of hydraulic fluid | Before starting a job in a hydraulic system, relieve the pressure in the system. Use protection clothes and goggles. | |
1 | Detach the hydraulic pipes on the pump (1) | Catch the hydraulic oil in an appropriate container. | |
2 | Remove the hydraulic pump (1) and lift out the intermediate flange (4) | Catch the oil run-off in an adequate container. | |
Installing: Clean the sealing surfaces and replace the sealing gasket (3). | |||
| |||
3 | Install in reverser order | ||
4 | Check the hydraulic oil level in the reservoir, and correct if necessary | Follow the maker's instructions for service and maintenance. | |
5 | Fill the gearbox with oil and correct the level | Gearbox 715.372/504/517/527/531/563/565/567/568/576 |
PTO