AR26.40-T-0335A | Remove/install input shaft radial shaft sealing ring | 9.10.06 |
TRANSMISSION 714.669 in MODEL NMB671
T26.40-0002-01
1 Input shaft bearing cap
2 Radial shaft seal
3 Puller
| Disassemble | ||
1 | Disassemble transmission | ||
| Removing | ||
2 | Pull radial shaft sealing ring (2) out of input shaft bearing cap (1) | | |
3 | Clean all parts, check for wear and replace parts if necessary | ||
| Install | ||
4 | Drive radial shaft sealing ring (2) into input shaft bearing cap (1). | | |
| Assemble | ||
5 | Assemble transmission |
000 589 28 33 00
Puller, dia. 28-37 mm
Drift
317 589 07 15 00