Remove/install central clutch operator

AR26.40-P-0345D

4.12.09

TRANSMISSION 716.6 (except 716.631 /638 /654 /664 /669) except CODE (424) Sequentronic automated manual transmission (SEQ)

P26.40-2016-11

1 Transmission

9 Central clutch release bearing

9/1 Hydraulic line

9/2 Vent line

9/3 Bolts

Modification notes

13.7.00

Value changed from 10 Nm to 8 Nm

Specification in row BA26.40-P-1001-01C for transmission 716.60/
62/640/641/644/66 revised

Fig. item etc.	Work instructions
	Remove/install transmission	Model 163	AR26.10-P-0020GI
		Model 170 except 170.444 with 716.630, 170.447 with 716.622, 170.449 with 716.630/662, 170.456 with 716.660/667 Model 208 except 208.344 with 716.627, 208.448 with 716.663 Model 210	AR26.10-P-0020D
		170.444 with 716.630, 170.447 with 716.622, 170.449 with 716.630/662, 170.456 with 716.660/667
		208.344 with 716.627, 208.448 with 716.663
		Model 203, 209	AR26.10-P-0020P
		Model 211 except 211.043 with 716.628, 211.061 with 716.623, 211.243 with 716.628, 211.261 with 716.623	AR26.10-P-0020T
		211.043 with 716.628, 211.061 with 716.623, 211.243 with 716.628, 211.261 with 716.623
	Fasten transmission on assembly stand		AR26.10-P-0036D
9	Central clutch release bearing	 Check for noises, rough operation, leakage and wear, replace if necessary.
9/3	Bolts	Bolt of central clutch release bearing on clutch housing	*BA26.40-P-1001-01C

 Housing

Number	Designation		Trans-mission 716.6


BA26.40-P-1001-01C	Bolt of central release bearing on clutch housing	Nm	10