AR26.40-B-2470I | Remove and install front section of transmission housing | 12.02.16 |
Manual transmission 710.265, 710.267, 710.270 with Vehicle 688, 979
B26.40-0033-06
40 Bolt of the input shaft retaining cover.
41 Input shaft retaining cover assembly
42 Input shaft retaining cap
43 Oil deflector
44 Taper roller bearing outside race
45 Oil seal (front)
46 Shim of the bearing and pilot retaining cover (0.102)
47 Shim of the bearing and pilot retaining cover (0.178)
48 Shim of the bearing and pilot retaining cover (0.254)
49 Shim of the bearing and pilot retaining cover (0.508)
50 Shim of the bearing and pilot retaining cover (0.762)
51 Shim of the bearing and pilot retaining cover (1.016)
52 Expansive plug
53 Filler plug
54 PTO window cover bolt
55 PTO window cover
56 Bars positioning ball
57 Bars actuation spring
58 Springs retaining plate
59 Bolt of the springs retaining plate
60 Pin of the case
61 Expansion plug
62 Housing bolt
63 Expansive plug
64 Oil seal (rear)
65 Universal joint yoke
66 Nut of the universal joint yoke
67 Sealing plug of the rear case
68 Bolt of the countershaft rear retaining cover
69 Countershaft rear retaining cover
70 Speedometer pinion
71 Oil seal of the speedometer connection
72 Speedometer connection
73 Speedometer connection assembly
74 Rear housing
75 Washer of the reversing light switch
76 Reversing light switch
77 Drive end housing
78 Sealing plug of the front case
79 Magnetic plug
80 Shim of the countershaft bearing retaining cover (0.102)
81 Shim of the countershaft bearing retaining cover (0.178)
82 Shim of the countershaft bearing retaining cover (0.254)
83 Shim of the countershaft bearing retaining cover (0.508)
84 Shim of the countershaft bearing retaining cover (0.762)
85 Shim of the countershaft bearing retaining cover (1.016)
86 Thrust washer of the countershaft bearing outside race
87 Retaining cover of the countershaft front bearing
88 Bolt of the countershaft front retaining cover
89 Fastening bolt of the reverse gear intermediate gear shaft.
| Remove and install | ||
1 | Remove the shift assembly | ||
2 | Install the transmission on an adequate device, fastening it by the prolongation, to permit the removal of the case (77) from the top part | ||
3 | Drain the transmission lubricant oil | ||
| Manual gearbox - oil change | ||
4 | Remove gearbox front case | ||
5 | Install the gearbox front case | ||
Primary shaft axial play | |||
Main shaft axial play | |||
| |||
| |||
|
Test values for PTO
Número | Denominação | Gearboxes 710.267 | Gearboxes 710.270 | |||
BE26.45-B-1001-01E | Countershaft axial play | mm | 0,025...0,100 | 0,025...0,100 | ||
BE26.45-B-1002-01E | Main shaft axial play | mm | 0,025...0,100 | 0,025...0,100 | ||
Housing