1 | Shift rod |
2 | Shim |
3 | Rubber sealing ring |
4 | Shift piston |
W26.35-1025-06
5 | Puller |
W26.35-1026-06
6 | Screw plug |
W26.35-1027-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Remove | ||
1 | Remove splitter box cylinder. | ||
2 | Remove screw plug (6) by 5 turns. | ||
3 | Pull out shift rod (1) using a suitable tool in direction of drive. | ||
4 | Warm shift piston (4) to approx. 80 °C and remove from shift rod (1). | Puller | |
5 | Remove rubber sealing ring (3) from shift piston (4). | ||
6 | Remove shim (2). | ||
| Install | ||
7 | Determine shim (2) for shift piston (4) of splitter box. | ||
Adjustment dimension for splitter group shift piston | |||
8 | Press in shift rod (1) in direction of power output using assembly tool. | ||
| Assembly tool for installing shift rod of splitter group | ||
9 | Tighten screw plug (6). | Coat thread of screw plug (6) with sealant. | |
Loctite 5203 sealant | |||
Splitter group shift rod lock to transmission housing | |||
10 | Install determined shim (2). | ||
11 | Attach rubber sealing ring (3) to shift piston (4) and coat with lubricant. | Synthetic grease 50 g | |
12 | Apply thread locking compound to thread of shift piston (4) and install shift piston (4). | Remove excess thread locking compound at shift piston (4) and on shift rod (1) using a suitable rag. | |
Quick-acting adhesive, Loctite 270 | |||
Shift piston to splitter group shift rod | |||
Puller | |||
13 | Install splitter box cylinder. |
715 589 02 07 00
Puller