AR26.30-T-0315A | Disassembling and assembling rear transmission cover | 15.6.09 |
TRANSMISSION 714.669 in MODEL NMB671
T26.30-0003-01
1 Rear transmission cover
2 Screw plug
3 Inner sealing ring
4 Outer sealing ring
| Removing | ||
1 | Remove rear transmission cover (1). | ||
| Disassemble/assemble | ||
2 | Remove outer (4) and inner (3) sealing ring | - Clamp rear transmission cover (1) in a vise. Use aluminum soft vise jaws. - Drive sealing rings from inside to outside using drift. | |
| |||
Assembling: - Clean all seal rings, check for damage and wear and replace if necessary. - Coat sealing lip of outer sealing ring with long-life grease. | |||
Long-life grease | |||
3 | Remove screw plug (2) | ||
4 | Assemble in the reverse order | ||
| Install | ||
5 | Install rear transmission cover (1). |
Drift
714 589 00 15 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |