AR26.20-W-1024A | Remove/install breather on gear module | 26.4.11 |
TRANSMISSION 715.3 /5 in MODEL 375.4, 930, 932, 933, 934, 940, 943, 944 with CODE (GE3) Mercedes PowerShift
TRANSMISSION 715.3 in MODEL 930, 933, 934, 940, 943, 944 with CODE (GE7) Mercedes PowerShift 2
TRANSMISSION 715.3 in MODEL 930, 932, 933, 934 with CODE (GS7) Gear control II
W26.20-1301-09
Shown on transmission 715.5
1 Sealing washer
2 Clamp
A92 Gear module
3 Breather cap
4 Rubber grommet
Modification notes
| Removing | ||
1 | Detach rubber grommet (4) with breather cap (3) and remove clip (2) with sealing washer (1) from gear module (A92) | ||
2 | Clean area surrounding breather on gear module (A92) | ||
| Install | ||
3 | Insert sealing washer (1) in the clamp (2) | ||
4 | Install clamp (2) with sealing washer (1) on gear module (A92) | ||
5 | Insert cap (3) into rubber grommet (4) | ||
6 | Press rubber grommet (4) with cap (3) until it engages into the clip (2) |