Remove/install splitter sensor · ar2620w1023a · Mercedes-Benz WIS

AR26.20-W-1023A

Remove/install splitter sensor

7.8.08

TRANSMISSION 715.370 /380 /515 /525 with CODE (GE3) Mercedes PowerShift

TRANSMISSION 715.370 /380 with CODE (GE7) Mercedes PowerShift 2

TRANSMISSION 715.500 /507 /510 /513 /520 /540 with CODE (GS7) Gear control II

W26.20-1097-11

Shown on transmission 715.520 with code (GS7) Gear control II

1 Electrical connector

B62 Splitter sensor (SSP)

 	Remove/install
1	Unplug electrical connector (1) from splitter sensor (SSP) (B62)
2	Unscrew splitter sensor (SSP) (B62)	 Transmission 715.500/507/510/513/ 520/540	*BA26.19-N-1004-01A
		 Transmission 715.370/380/515/525	*BA26.19-N-1002-01KL
3	Install in the reverse order
4	Perform minor teach-in process	 Only if a new splitter sensor (SSP) (B62) was installed.	AR54.21-W-0009A

 Sensors

Number	Designation		Transmission 715.500/507/510/513/520/540 with code GS7


BA26.19-N-1004-01A	Splitter sensor to transmission housing	Nm	60

 Sensors

Number	Designation		Transmissions 715.370/380	Transmission 715.515/525


BA26.19-N-1002-01KL	Splitter sensor to transmission housing	Nm	60	60