AR26.20-W-1022A | Remove/install range sensor | 9.3.10 |
TRANSMISSION 715.350 /380 /515 /525
with CODE (GE3) Mercedes PowerShift
except CODE (BD9) Telma retarder Focal F 3300
TRANSMISSION 715.350 /370 /380
with CODE (GE7) Mercedes PowerShift 2
except CODE (BD9) Telma retarder Focal F 3300
TRANSMISSION 715.500 /507 /510 /513 /520 /540
with CODE (GS7) Gear control II
except CODE (BD9) Telma retarder Focal F 3300
W26.20-1094-06
Shown on transmission 715.520 with code (GS7) Gear control II
1 Range module cover
2 Intermediate plate
3 Gasket
4 O-ring
5 O-ring
6 Range module housing
7 Electrical connector
B63 Range sensor (SRA)
Y31 Range 1 solenoid valve (MR1)
Y32 Range 2 solenoid valve (MR2)
| Remove/install | ||
1 | Unpressurized circuit 4 of compressed-air system | ||
2 | Disconnect electrical connector (7) | ||
3 | Detach range module cover (1) with intermediate plate (2) | Installation: Install new gaskets (3) and coat with synthetic grease. | |
Transmission 715.500/507/510/513/520/ | |||
Transmission 715.350/370/380/515/525 | |||
4 | Remove range sensor (SRA) (B63), range 1 solenoid valve (MR1) (Y31) and range 2 solenoid valve (MR2) (Y32) from range module cover (1) | Installation: Install new O-rings (4, 5) and coat with synthetic grease. | |
5 | Install in the reverse order | ||
6 | Teach in gear control (GS) control unit |
Range module
Number | Designation | Transmission | ||
BA26.20-N-1002-02A | Bolt, cover to range module | Nm | 6 | |
Range module
Number | Designation | Transmission | Transmissions | ||
BA26.20-N-1002-02KL | Bolt, cover to range module | Nm | 6 | 6 | |
Range module
Repair materials
Number | Designation | Order number |
BR00.45-Z-1027-06A | Synthetic grease 50 g | A 001 989 32 51 10 |