AR26.19-W-0015A | Remove/install shift force assist solenoid valve | 6.2.09 |
TRANSMISSION 715.320 in MODEL 375.3 with CODE (GS1) "Manual" gearshift
TRANSMISSION 715.320 in MODEL 970, 972, 974, 976 with CODE (GS1) "Manual" gearshift
W26.19-1037-05
1 Plug connection
2 Supply compressed-air line
3 Clutch booster compressed-air line
4 Gear control valve compressed-air line
5 Power take-off compressed-air line (transmission with power take-off)
6 Bolt
Y64 Shift force assistance solenoid valve
| Remove/install | ||
1 | Unplug connector (1) at shift force assist solenoid valve (Y64) | ||
2 | Detach supply compressed-air line (2) at screw connection | Counterhold screw connection. | |
| |||
3 | Detach power take-off compressed-air line (5) at shift force assist solenoid valve (Y64) | Only valid for transmission with power take-off. | |
Installation: Replace sealing rings. | |||
| |||
4 | Detach clutch booster compressed-air line (3) and gear control valve compressed-air line (4) from shift force assist solenoid valve (Y64) | Installation: Replace sealing rings. | |
| |||
5 | Unscrew bolts (6), remove shift force assist solenoid valve (Y64) | | |
6 | Install in the reverse order |
Sensors
Number | Designation | Trans-mission | ||
BA26.19-N-1007-01C | Shift force assist solenoid valve to transmission | Nm | 25 | |
BA26.19-N-1008-01C | Compressed-air line to screw connection on solenoid valve of shift force assist | Nm | 20 | |
BA26.19-N-1009-01C | Compressed-air line to shift force assist solenoid valve | M10 | Nm | 20 |
M12 | Nm | 30 | ||