Remove/install gear recognition sensor

AR26.19-S-0035EF

Remove/install gear recognition sensor

01.04.2020

Transmission

700.7 in model 447 with engine 622.8

1

Gear recognition sensor

2

Filler neck

3

Electrical connector

4

Screw

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove filler neck (2) from air filter housing and place outside working area.

 To do so, release and remove filler neck (2).

2

Disconnect electrical connector (3).

3

Unscrew bolt (4).

 Bolt, gear recognition sensor to transmission housing

*BA26.40-N-1010-01P

4

Remove gear recognition sensor (1).

 Installation: Check sealing ring of the gear recognition sensor (1) for damage.

If damage exists,



Replace gear recognition sensor (1).

5

Install in the reverse order.

 Housing

Number

Designation

Transmission 700.7 in model 447

BA26.40-N-1010-01P

Bolt, gear recognition sensor to transmission housing

Nm

8