1a | Drain screw |
1e | Oil filler plug |
P26.00-2160-11
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on self-locking nuts and bolts | ||
Drain off | |||
1 | Remove rear section of lower engine compartment lining |
| |
Transmission 716.7 in model 205, 253 | |||
Transmission 716.7 in model 213, 238 | |||
2 | Thoroughly clean area around oil filler screw (1) and drain screw (1) | Assembly cleaner | |
3 | Unscrew oil filler screw (1e) from transmission housing | ||
4 | Unscrew drain screw (1a) from transmission housing and collect emerging transmission oil in a suitable container | Only change the transmission oil when the transmission is at operating temperature. | |
Pour in | |||
5 | Screw new drain screw (1a) into transmission housing | Drain screw | |
6 | Pour in oil until it reaches lower edge of filler opening | Gear oil | |
7 | Screw new oil filler screw (1e) into transmission housing | Oil filler screw | |
8 | Check transmission for leaks | ||
9 | Install rear section of lower engine compartment lining |
| |
Transmission 716.7 in model 205, 253 | |||
Transmission 716.7 in model 213, 238 |