B29.10-0013-09
1 | Hydraulic sender cylinder | 7 | Breather | |
2 | Pedal bracket | 8 | Reservoir filter | |
3 | Sender cylinder fastening screws | 9 | Filler cap sealing ring | |
4 | Rod protective bellows | 10 | Reservoir end cover | |
5 | Expander ring for connection to cylinder | 11 | Reservoir fastening clamp | |
6 | Hydraulic reservoir | 12 | Flexible hydraulic hose |
| Remove/install | ||
1 | Turn-off the master switch | ||
2 | Open the front cover | ||
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
3 | Remove brake fluid from hydraulic reservoir (6) be means of suction | Collect brake fluid in an appropriate container for ecologically correct disposal. | |
4 | Remove the flexible hydraulic hose (12), disconnecting it first from lower metal tubing connection and then from sender cylinder connector | Remove/install clutch hydraulic line | |
Installation: First connect the flexible hydraulic hose (12) to sender cylinder and then to the metal tubing connection. | |||
5 | Remove the tank securing clamp (11) and disconnect the hydraulic reservoir (6) from the snap ring that connects with the cylinder (5), removing it from the emitting hydraulic cylinder (1) | Installation: Install the new snap ring and a new fastening clamp. | |
6 | From inside the cab remove both sender cylinder fastening screws (3), and remove hydraulic sender cylinder (1) from outside | ||
7 | Remove the stem protective bellows (4) from hydraulic sender cylinder | Installation: Install new protective bellows. | |
8 | Wash the hydraulic reservoir (6), filter (8), and filler cap (10) using ethyl alcohol and dry with clean and dry compressed air | Installation: Apply a new sealing ring to filler cap. | |
9 | Replace the sender hydraulic cylinder repair (1) | Detach/attach line | |
10 | Refill with specified brake fluid and bleed the hydraulic clutch actuator system | Bleed clutch operating system | |
11 | Adjust hydraulic sender cylinder actuator rod play (1) | Adjust clutch pedal | |
12 | Check the hydraulic system for tightness |