1 | Purging equipment |
2 | Protective cover |
3 | Bleeding valve |
4 | Bleeding hose |
B25.20-0019-06
1 | Purging equipment |
2 | Protective cover |
3 | Bleeding valve |
4 | Bleeding hose |
B25.20-0022-06
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
1 | Remove the reservoir cap and connect the bleeding equipment (1) to the reservoir filler neck | ||
Topical note | Brake fluid notes | . | |
Information about brake fluid. | |||
2 | Remove the protective cap (2) of the bleeding valve (3) and install the hose (4) in such a way the fluid is drained to a proper container | Collect brake fluid in an appropriate container for ecologically correct disposal. | |
3 | Apply pressure to the system, open the bleeding valve (3) at least 45° on the hydraulic slave cylinder, and let the brake fluid flow out until no more air bubbles are in the bleeding hose | See the operating instructions of the bleeding equipment manufacturer. | |
Brake fluid, DB supply specification 7760.30 (DOT 4) | |||
4 | Close the bleeding valve (3), remove the hose (4) and the container, and install the protective cap (2) | ||
5 | Relieve the pressure and remove the bleeding equipment | ||
6 | Refill the fluid reservoir up to the specified level and install the cap | BRAZIL | |
Brake fluid, DB supply specification 7760.30 (DOT 4) | |||
7 | Check operation and leak-tightness of the clutch actuation system |