AR25.19-W-0100B | Remove/install clutch travel sensor | 9.6.11 |
MODEL 930, 932, 933, 934 with CODE (GE2) Electronic drive control II
MODEL 375.4, 930, 932, 933, 934, 940, 944 with CODE (GE3) Mercedes PowerShift
MODEL 930, 932, 933, 934 with CODE (GE7) Mercedes PowerShift 2
W25.19-1011-11
1 Electrical connector
2 Electrical connector
B2 Clutch travel sensor
W25.19-1012-11
3 Bolts
4 Retaining plate
B2 Clutch travel sensor
Modification notes
| Remove/install | ||
1 | Disconnect electrical connector (2) | ||
2 | Disconnect electrical connector (1) from clutch travel sensor (B2) | ||
3 | Remove bolts (3) from clutch travel sensor (B2) | Installation: Insert screws (3) with instant-set adhesive: | |
For clutch booster with metallic housing | |||
For clutch booster with plastic housing | |||
| |||
4 | Remove clutch travel sensor (B2) with retaining plate (4) | Installation: Replace the sealing rings on the clutch travel sensor (B2). | |
5 | Install in the reverse order | ||
6 | Perform minor teach-in process |
Clutch booster
Number | Designation | Model | Model | Model | |
BA25.20-N-1004-01J | Bolt, clutch travel sensor to clutch booster | Nm | 5 | 5 | 5 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1008-02A | Quick-acting adhesive, Loctite 270 | A 002 989 93 71 |
BR00.45-Z-1033-02A | Quick-acting adhesive, Loctite 495 | Henkel Loctite Deutschland GmbH Arabellastrasse 17 D-81925 Munich Germany Tel. +49 899268-0 Fax +49 899101978 www.Loctite.de |