ประเภท ar · หัวข้อ 23.20 · เวอร์ชัน 0109 · 2019-11-13
ใช้กับ: Engine 904.9 in model 958.0 with code N52 (Rear engine power take-off, output torque 600 Nm) Engine 906.9 in model 958.0 with code N52 (Rear engine power take-off, output torque 600 Nm) Engine 924.9 in model 958.0/1 with code N52 (Rear engine power take-off, output torque 600 Nm) Engine 926.9 in model 958.0/1 with code N52 (Rear engine power take-off, output torque 600 Nm) Engine 926.9 in model 958.2 with code N52 (Rear engine power take-off, output torque 600 Nm)
with code N52 (Rear engine power take-off, output torque 600 Nm)
Engine
906.9 in model 958.0
with code N52 (Rear engine power take-off, output torque 600 Nm)
Engine
924.9 in model 958.0/1
with code N52 (Rear engine power take-off, output torque 600 Nm)
Engine
926.9 in model 958.0/1
with code N52 (Rear engine power take-off, output torque 600 Nm)
Engine
926.9 in model 958.2
with code N52 (Rear engine power take-off, output torque 600 Nm)
1
Rear engine power inlet
2
Seal ring
3
Activation flange
W23.20-1000-10
Remove/install
Warning
Risk of injury caused by body parts being pinched or crushed as cab is tilted
Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut.
Remove rear engine power inlet (1) on the distribution housing
Heat external part of distribution housing on the rear engine power inlet area (1) with a thermal blower.
Installation: Tighten M81.25 threaded retaining pin as an aid for the timing housing assemble. Observe the master caliber for holes when compressing-in the engine rear power takeoff (1).
