1 | Electrical line |
2 | Screw |
S22.10-4546-06
S22.10-4547-09
3 | Screw | 5 | Engine mount | |
4 | Screw |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove | ||
1 | Disconnect battery ground line | ||
2 | Remove engine cover | ||
3 | Remove charge air hose upstream of charge air cooler on charge air cooler | ||
4 | Remove electric line (1) | ||
5 | Remove screw/bolts (2) for engine mounts | ||
6 | Install engine hoist and raise engine | ||
Support braces | |||
Engine lifting device | |||
7 | Remove screws (3) | ||
8 | Loosen screw/bolts (4) a few turns | ||
9 | Remove lower engine compartment paneling | ||
10 | Remove screws (4) | ||
11 | Remove engine mount (5) | ||
| Install | ||
12 | Install engine mounts (5) | ||
13 | Screw in screws/bolts (3, 4) handtight | ||
14 | Install lower engine compartment paneling | ||
15 | Lower vehicle | ||
16 | Tighten screw/bolts (3, 4) | Bolt, engine mount at front to integral carrier | |
17 | Lower engine onto engine mount (5) | ||
18 | Screw in screw/bolts (2) | Bolt, front engine mount to engine support | |
19 | Remove engine hoist | ||
M8 | |||
Support braces | |||
Engine lifting device | |||
20 | Attach electrical line (1) | Nut, circuit B+ to alternator | |
21 | Attach charge air hose upstream of charge air cooler on charge air cooler | ||
22 | Install engine cover | ||
23 | Connect ground cable to battery |
447 589 00 63 00
Support braces
639 589 00 61 00
Engine lifting device