Remove/install rear engine mount

AR22.10-P-1160T

11.11.11

ENGINES 646.9 in MODEL 211.00 /20 /60

ENGINES 647 in MODEL 211.01 /21 /61

ENGINES 112 in MODEL 211.06 /26

ENGINES 113 in MODEL 211.07 /27

ENGINES 271 in MODEL 211.04 /24

ENGINES 648 in MODEL 211.02 /22

ENGINES 646.8 in MODEL 211

P22.10-2086-11

Shown on model 211.00 with transmission 716.651

1 Transmission

2 Screw/bolts

3 Screw/bolts

4 Rear engine mount

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of lifting platform and position the four support plates at lifting platform support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1.1	Remove rear part section of bottom section of soundproofing	Model 211 with diesel engine	AR94.30-P-5300T
1.2	Remove rear part section of engine compartment paneling	Model 211 with gasoline engine	AR61.20-P-1105T
2	Support the transmission (1) with a transmission jack and transmission platform and raise it a little	Transmission jack 2.0-7.0 t gotis://H_00.10_01.0
		Transmission plate for passenger cars and commercial vehicles gotis://A_25/35/49_02.0
3	Remove screw/bolts (2, 3)	Engines 646, 647, 648, 112, 113
		 Screw/bolt, rear engine mount to rear engine crossmember	*BA22.10-P-1004-03A
		 Bolt or nut, rear engine mount to transmission	*BA22.10-P-1003-03A
		 Bolt or nut, rear engine mount to transmission	*BA22.10-P-1006-03A
4	Remove rear engine mount (4)	 Installation: Observe installation position.
5	Install in the reverse order

 Engine mount, engine support (engine side)

Number	Designation		Model 211 except 4 MATIC


BA22.10-P-1003-03A	Bolt/nut, rear engine mount to transmission	Nm	50
BA22.10-P-1004-03A	Rear engine mount on engine support	Nm	28
BA22.10-P-1006-03A	Rear engine mount on rear bracket	Nm	50