1 | Radiator shutters |
2 | Screw |
3 | Bracket |
4 | Electrical connector |
5 | Electrical connector |
P20.20-A052-05
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
2 | Remove front bumper. | ||
3 | Release and disconnect electrical connector (4). | Engine 264, 274.9 in model 167 | |
4 | Remove electric line from bracket (3) | Engine 264, 274.9 in model 167 | |
5 | Unscrew screws for the bracket (3) and remove bracket (3). | Engine 264, 274.9 in model 167 | |
Screw, bracket to mounting support of radiator unit at front bottom | |||
6 | Release and disconnect electrical connector (5) from the radiator shutters (1). | ||
7 | Remove screw (2) and remove radiator shutters (1). | Screw, radiator unit at front top | |
8 | Install in the reverse order | ||
Concluding tasks | |||
9 | Calibrate DISTRONIC PLUS controller unit. | Engine 264, 274.9 in model 167 | |
|