1 | Coolant hose |
2 | Nuts |
3 | Screw |
4 | Screw |
5 | Guide frame |
6 | Air duct insert |
7 | Radiator low-temperature circuit |
8 | Coolant hose |
P20.20-2526-12
P20.20-2531-07
9 | Screw |
| Remove/install | ||
1 | Detach left front wheel | ||
2 | Remove left front fender liner | ||
3 | Drain coolant from low-temperature circuit | ||
4 | Detach lower coolant hose (1) | ||
5 | Unscrew nuts (2) | Bolt/nut, wheel arch radiator to bracket | |
6 | Remove screw/bolts (3, 4) at front bumper | ||
7 | Remove screw/bolt (9) of front bumper on bracket on front carrier module | ||
8 | Tip low-temperature circuit cooler (7) downstream of rear and upper coolant hose (8) | ||
9 | Push low-temperature circuit cooler (7) from guide frame (5) and remove downwards | ||
10 | Unclip both air duct inserts (6) on low-temperature circuit radiator (7) | When replacing the low-temperature circuit radiator (7) | |
11 | Install in the reverse order | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
12 | Perform an engine test run and check engine for proper function |