Install
1 | Lean the lifting device part (A) on the cooler (1). |
2 | Place the side props (2) on the right- and left-hand sides of the cooler (1) on the deep holes, and pull up until the latch (4) snaps. |
When removing the part (A), release the latch (4) by pulling the ring. |
3 | Install the fastening clamps (3) on the side of the cooler (1). |
On the left-hand side of the cooler (1), only one fastening clamp (3) can be installed. Remove the second fastening clamp on part (A) of the lifting device. |
W20.20-1040-03
W20.20-1041-03
4 | Insert the lever bar of part (B) on the front part (A). |
5 | Place the bar of part (C) on the lever bar of part (B). |
The lever bar of part (C) makes easier stabilizing the cooler (1), preventing it from toppling. |
6 | Fit the hoist (5) in the fastening eyelet of part (A). |
7 | Removing the lifting device in reverse order. |
W20.20-1039-03