321 589 00 63 00
Thrust piece
1 | Put flange (2) under the workshop press. |
2 | Press flange (2) with thrust piece (3) out of the bearing shaft; in doing so, hold the coolant pump housing (1). |
W20.10-1028-02
3 | Remove retaining ring (4) of the bearing shaft (5) from the coolant pump housing (1). |
W20.10-1029-02
4 | Place coolant pump housing (1) on the workshop press. |
Put suitable plates underneath so that the bore of the bearing shaft (5) is exposed. |
5 | Press bearing shaft (5) with a suitable drift (6) out of the impeller (7) and coolant pump housing (1). |
Pick up bearing shaft (5). |
W20.10-1030-11
6 | Turn over coolant pump housing (1) on the workshop press. |
7 | Press cassette-type seal (8) with a suitable drift (9) out of the coolant pump housing (1). |
W20.10-1031-02