1 | Guide pulley |
3 | Contact protection |
4 | Electrical line B+ |
5 | Screw |
G2 | Alternator |
P15.40-2731-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Disconnect the ground line for the on-board electrical system battery(G1). | ||
2 | Remove poly-V-belt. | ||
3 | Remove circulation pump 2 for low-temperature circuit (M43/7) and place to one side. | Engine 654 in model 205 | |
4 | Remove guide pulley (1). | ||
5 | Remove contact protection (3). | ||
6 | Remove electric line B+ (4) at alternator(G2). | Nut, circuit B+ to alternator | |
7 | Remove bolts (5). | Screw, alternator to major assembly carrier/oil filter | |
8 | Release, disconnect electrical connector at alternator(G2) and remove alternator(G2). | ||
9 | Install in the reverse order. | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Perform an engine test run and check the engine for proper function. |