AR15.30-S-7100S | Remove/install starter | 14.9.09 |
ENGINES 272, 646 in MODEL 636
ENGINES 112, 272, 646 in MODEL 639
S15.30-4500-06
Shown on engine 646
1 Electric line circuit 30
2 Electric cable circuit 50
3 Plastic caps
4 Bolts
M1 Starter
S15.30-4501-06
Shown on engine 112
1 Electric line circuit 30
2 Electric cable circuit 50
3 Plastic caps
4 Bolts
M1 Starter
Modification notes
14.9.09 | Value modified: Nut, connection for circuit 30 | ||
Value modified: Nut, connection for circuit 50 | |||
Value modified: Nut, connection for circuit 30 | |||
Value modified: Nut, connection for circuit 30 | |||
Value modified: Nut, connection for circuit 50 |
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Disconnect battery ground line | ||
2 | Detach rear lower engine compartment paneling | Only model 636, 639.7/8 as of vehicle identification number (VIN) 055347 | |
3 | Remove plastic caps (3) | ||
4 | Disconnect electrical cable terminal 30 (1) | Engine 646 | |
Engine 272 | |||
Engine 112 | |||
5 | Disconnect electrical cable terminal 50 (2) | Engine 646 | |
Engine 272 | |||
Engine 112 | |||
6 | Remove bolts (4) | Engine 646 | |
Engine 272 | |||
Engine 112 | |||
7 | Remove starter motor (M1) from below | ||
8 | Install in the reverse order |
Starter
Number | Designation | Engine 646.980/ | |
BA15.30-N-1001-01G | Bolt connecting starter to crankcase | Nm | 40 |
BA15.30-N-1002-01G | Nut, connection for circuit 30 | Nm | 16 |
BA15.30-N-1003-01G | Nut, connection for circuit 50 | Nm | 7 |
Starter
Number | Designation | Engine | Engine | ||
BA15.30-N-1001-01P | Nut, connection for circuit 30 | Nm | 16 | 16 | |
BA15.30-N-1002-01P | Nut, connection for circuit 50 | Nm | 7 | 7 | |
BA15.30-N-1003-01P | Bolt connecting starter to crankcase | Nm | 40 | 40 | |
Starter