Release tool for SPT/JPT contacts
210 589 02 33 00
P54.18-2599-01
A Secondary-releasing socket
1 Use a suitable tool to press slide out of its end detent position in direction of arrow.
Do not damage seal at slide.
P54.18-2530-06
B Removing contacts from socket (SPT)
1 Insert release tool from the front through the openings at the contact receptacle of the socket.
The spring plates (2) of the contact socket are pressed together when this is done.
2 Remove the contacts from the socket (1) by pulling slightly on the relevant cable.
Installation
Check that the contact socket is properly locked in place in the housing by pulling slightly on the cable.
Illustration shows 4-pin SPT socket