AR15.12-P-2133CD | Remove/install crankshaft position sensor | 23.4.12 |
ENGINES 651 in MODELS 166, 172, 204, 207, 212, 218, 221
P15.12-2129-08
Shown on engine 651.911
1 Electrical connector
L5 Crankshaft position sensor
2 Screw/bolt
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1.1 | Remove underfloor paneling | Model 166 | |
1.2 | Remove rear bottom part of soundproofing | Model 172 | |
Model 204.0/2/3, 207, 212, 218 | |||
1.3 | Detach lower engine compartment paneling | Model 221 | |
Model 204.9 | |||
2 | Disconnect electrical connector (1) on crankshaft position sensor (L5) | ||
3 | Remove screw/bolt (2) and remove crankshaft position sensor (L5) | | |
4 | Install in the reverse order |
Hall sensor