Remove/install sieve on metering device compressed air inlet for EATS

AR14.40-W-2050C

23.11.10

ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS4) BlueTec 4

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS5) BlueTec 5

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS4) BlueTec 4

ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS5) BlueTec 5

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS4) BlueTec 4

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS5) BlueTec 5

ENGINES 926.9 in MODEL 958.0 with CODE (MS4) BlueTec 4

ENGINES 926.9 in MODEL 958.0 with CODE (MS5) BlueTec 5

W14.40-1517-08

1 Metering device

2 Compressed-air line

5 Compressed air inlet

3 Strainer

4 Screwdriver

 	Remove/install
1	Open maintenance flap
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.	AS60.80-Z-0001-01A
2	Tilt cab
	Notes on tilting the cab		AH60.80-N-0003-01A
3	Remove compressed air line (2) from metering device (1)	 Wait until the pressure is released before starting any work on the exhaust aftertreatment system.
		Seal bore with suitable stop plug.
		 Installation: Check connector for compressed air line (2) for foreign objects, contamination and damage before assembly.
			*BA00.18-N-1003-01A
	Metering device of exhaust aftertreatment system modified		BT14.40-W-0002-01A
4	Remove sieve (3) with a screwdriver (4)
5	Install in the reverse order
Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
6	Start engine
7	Run engine and inspect metering device (1) for leaks

 Compressed air lines

Number	Designation			Model 375.1	Model 375.3, 375.4


BA00.18-N-1003-01A	Compressed air connection system SCHÄFER "SDF" in metallic material	M101	Nm	5	5

 Compressed air lines

Number	Designation			Models 930, 932, 933, 934, 950, 952, 953, 954, 957, 958	Model 970, 972, 974, 975, 976


BA00.18-N-1003-01A	Compressed air connection system SCHÄFER "SDF" in metallic material	M101	Nm	5	5