Install wiring harness for the metering device heating element

AR14.40-W-2036B

12.1.10

ENGINE 457.9 in MODEL 940, 942, 943, 944 with CODE (MS4) BlueTec 4

ENGINE 457.9 in MODEL 940, 942, 943, 944 with CODE (MS5) BlueTec 5

Modification notes

11.6.07	Tilt back cab - added.	Step 5
	Close maintenance flap - added.	Step 6

	Install
Danger!	Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning from swallowing AdBlue	Only pour AdBlue into suitable containers. Only begin work on the exhaust aftertreatment system after releasing the pressure.	AS14.40-Z-0001-01A
	Notes on use, material properties and handling of AdBlue		AH14.40-N-0001-01A
1	Open maintenance flap
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.	AS60.80-Z-0001-01A
2	Tilt cab
	Notes on tilting the cab		AH60.80-N-0003-01A
3	Route and connect wiring harness for the metering device heating element		AR14.40-W-2036-01B
			*BR00.45-Z-1001-12A
4	Change data record, software and parameters in the engine control (MR) control unit		AR07.15-W-3000A
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.	AS60.80-Z-0001-01A
5	Lower cab
	Notes on tilting the cab		AH60.80-N-0003-01A
6	Close maintenance flap

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-12A	Terminal block for cable cross section up to 1.5 mm2	A 001 546 86 41