AR14.40-W-2026B | Remove, install AdBlue feed hose at metering device | 21.2.07 |
ENGINE 457.9 in MODELS 940, 942, 943, 944 with CODE (MS4) BlueTec 4
ENGINE 457.9 in MODELS 940, 942, 943, 944 with CODE (MS5) BlueTec 5
W14.40-1191-06
1 Metering device
2 AdBlue feed hose
3 AdBlue feed line
4 Continuous 1-ear clamping device
| Remove/install | ||
Danger! | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning from swallowing AdBlue | Only pour AdBlue into suitable containers. Only begin work on the exhaust aftertreatment system after releasing the pressure. | |
| Notes on use, material properties and handling of AdBlue | ||
1 | Open maintenance flap | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
2 | Tilt cab | ||
| Notes on tilting the cab | ||
3 | Remove top right soundproofing on frame | ||
4 | Detach AdBlue feed hose (2) at metering device (1) | Installation: Only use infinitely adjustable single-eye clamps (4). Replace removed cable ties. | |
5 | Detach AdBlue feed hose (2) at AdBlue feed line (3) and remove | Installation: Only use infinitely adjustable single-eye clamps (4). | |
6 | Install in the reverse order |