AR14.40-W-2024B | Remove/install magnetic adapter at AdBlue tank filler neck | 21.2.07 |
ENGINE 457.9 in MODELS 940, 942, 943, 944 with CODE (MS4) BlueTec 4
ENGINE 457.9 in MODELS 940, 942, 943, 944 with CODE (MS5) BlueTec 5
W14.40-1175-08
1 Bore
2 Fastening hook
3 Tank cap
6 AdBlue tank
7 Magnetic adapter (Elafix 40)
4 Screwdriver
5 Assembly aid
| Removing | ||
Danger! | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning from swallowing AdBlue | Only pour AdBlue into suitable containers. Only begin work on the exhaust aftertreatment system after releasing the pressure. | |
| Notes on use, material properties and handling of AdBlue | ||
1 | Unscrew tank cap (3) on AdBlue tank (6) | ||
2 | Introduce assembly aid (5) into bores (1) | ||
| Assembly aid for remove/install of magnetic adapter at AdBlue tank filler neck | ||
3 | Push fastening hooks (2) in direction of arrow inwards using two screwdrivers (4) and push in assembly aid (5) all the way | ||
4 | Pull out magnetic adapter (7) | ||
| Install | ||
5 | Press fastening hook (2) together by hand and introduce assembly aid (5) all the way into bores (1) | ||
| Assembly aid for remove/install of magnetic adapter at AdBlue tank filler neck | ||
6 | Introduce magnetic adapter (7) all the way into AdBlue tank (6) filler neck | ||
7 | Hold magnetic adapter (7) firmly and pull out assembly aid (5) | While pulling out the assembly aid (5) the fastening hooks (2) snap in audibly. |