Remove/install SCR air humidity and air temperature combination sensor

AR14.40-W-2018B

22.3.11

ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS4) BlueTec 4

ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS5) BlueTec 5

W14.40-1192-06

1 Clean air pipe

2 Bolts

B132 Air humidity and air temperature combination sensor

 	Remove/install
1	Switch off ignition
2	Open maintenance flap
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.	AS60.80-Z-0001-01A
3	Tilt cab
	Notes on tilting the cab		AH60.80-N-0003-01A
4	Disconnect electrical connector at SCR air temperature and air humidity combination sensor (B132)
5	Remove SCR air temperature and air humidity combination sensor (B132)		*BA14.40-N-1024-02B
6	Install in the reverse order

 Exhaust aftertreatment, Blue Tec

Number	Designation		Engine 457.9 with code MS4 or code MS5


BA14.40-N-1024-02B	SCR air temperature and air humidity combination sensor on clean air pipe	Nm	7