AR14.40-W-2003R | Remove/install SCR AdBlue pressure sensor | 22.3.11 |
ENGINES 926.9 in MODEL 949 with CODE (MS5) BlueTec 5
W14.40-1507-06
1 Metering device
2 O-ring
3 Electrical connector
B129 SCR AdBlue pressure sensor
| Remove/install | ||
Danger! | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
| Notes on use, material properties and handling of AdBlue® | ||
1 | Switch off ignition | ||
2 | Open engine hood and move to vertical position | ||
3 | Remove air intake duct for fresh air intake on cab | ||
4 | Disconnect electrical connector (3) at SCR AdBlue pressure sensor (B129) | ||
5 | Remove SCR AdBlue pressure sensor (B129) at metering device (1) | | |
6 | Install in the reverse order |
Exhaust aftertreatment, Blue Tec