Empty, fill AdBlue tank · ar1440p201402cda · Mercedes-Benz WIS

AR14.40-P-2014-02CDA	Empty, fill AdBlue tank
	000 588 06 98 00 Cover	WS98.00-P-0013B
	000 588 01 71 00 Extraction pump	WS14.00-P-0013B
	000 588 01 71 00 Extraction pump	WS14.00-P-0013B
	000 588 01 71 00 Extraction pump	WS14.00-P-0013B
	000 588 01 71 00 Extraction pump	WS14.00-P-0013B
	000 588 07 82 00 Filling unit	WS14.00-P-0014B
	000 588 07 82 00 Filling unit	WS14.00-P-0014B
	000 588 07 82 00 Filling unit	WS14.00-P-0014B
	000 588 07 82 00 Filling unit	WS14.00-P-0014B
	000 588 07 82 00 Filling unit	WS14.00-P-0014B
	000 588 07 82 00 Filling unit	WS14.00-P-0014B
	000 588 07 82 00 Filling unit	WS14.00-P-0014B
	000 588 06 98 00 Cover	WS98.00-P-0013B
	000 588 07 82 00 Filling unit	WS14.00-P-0014B
	000 588 06 98 00 Cover	WS98.00-P-0013B
	000 588 06 98 00 Cover	WS98.00-P-0013B

Engine	651 in model 172
	with code U77 (Diesel Emission control BLUETEC (SCR))

 Filling capacity for BlueTEC (SCR) diesel exhaust treatment

Number	Designation			Model 172
BF14.40-P-1001-01C	AdBlue® tank	Filling capacity	Liter	24,5
		Sheet		BB00.40-P-0352-01A

Draining

1	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2	Attach a rear apron protector and expose AdBlue® tank (1) in the trunk.

3	Unscrew cap of AdBlue® filler neck (2).

 When working on emission control system ensure scrupulous cleanliness. Dirt must not be allowed to find its way into the emission control system.
Damage and malfunctions can occur otherwise.

4	Cover area all over around the AdBlue® filler neck (2) with antistatic film.

5	Introduce extraction hose into the AdBlue® container (1).

 Note arrow on extraction pump (4) indicating direction of suction.

6	Suction AdBlue® with extraction pump (4) and extraction hose out of AdBlue® tank (1), catch it and dispose of it in an environmentally friendly manner. 

7	Pull extraction hose out of AdBlue® tank (1).

8	Screw cap onto AdBlue® filler neck (2).

9	Clean extraction pump (4) and extraction hose.

 Thoroughly flush out extraction pump (4) and extraction hose with water.
Otherwise damage will occur.

P14.40-2583-01

P14.40-2524-01

Filling the pump from a large container
 The filling tools are designed in such a way as to leave an unfilled space in the AdBlue® container (1) after switching off. Never pour in further AdBlue® after switching off.
Otherwise damage may occur to the AdBlue® tank (1).

10	Insert pump nozzle (5) of electric pump unit into AdBlue® filler neck (2) up to stop ring (6).

11	Fill AdBlue® tank (1).

 The pump nozzle (5) switches off automatically when the AdBlue® tank (1) is full.

12	Remove pump nozzle (5) from AdBlue® filler neck (2).

13	Attach cap to filler neck (2) of AdBlue® tank (3).

14	Use suitable means to remove AdBlue® residues and screw cap onto filler neck (2).

 Use only clean, lint-free rags to avoid contaminating the emission control system.
Failure of the emission control system can occur otherwise.

15	Remove antistatic film.

16	Remove rear apron protector.

P14.40-2525-01

Filling from a container (05) (10 l can)
 The filling tools are designed in such a way as to leave an unfilled space in the AdBlue® container (1) after switching off. Never pour in further AdBlue® after switching off.
Otherwise damage may occur to the AdBlue® tank (1).

17	Screw fitting (01) on connection (03) and close valves (02).

18	Tighten connection (04) on container (05) and connection (03) on filler neck (2) of AdBlue® container filler neck (1) finger-tight.

19	Lift container (05), open valves (02) and fill AdBlue® tank (1).

 Repeat process if necessary with further containers (05). No further AdBlue® will flow when the AdBlue® container (1) is full.

20	Close valves (02), unscrew connections (03, 04) and dispose of empty container (05) in an environmentally friendly manner.

21	Attach cap to filler neck (2) of AdBlue® tank (1) and remove AdBlue® residues using appropriate means.

22	Remove rear apron protector and antistatic film.

23	Clean filling tool.

 Thoroughly rinse filling tool with water.
Otherwise damage will occur.

P14.40-2387-01

Filling from a container (5 l can) with disposable hose

24	Screw disposable hose finger-tight onto container and onto filler neck (2) of AdBlue® tank (1).

25	Lift container and fill AdBlue® tank (1).

 Repeat process if necessary with further containers. No further AdBlue® will flow when the AdBlue® container (1) is full.

26	Unscrew disposable hose from filler neck (2) of AdBlue® tank (1) and dispose of empty container and disposable hose in an environmentally friendly manner.

27	Attach cap to filler neck (2) of AdBlue® tank (1) and remove AdBlue® residues using appropriate means.

 Use only clean, lint-free rags to avoid contaminating the emission control system.
Failure of the emission control system can occur otherwise.

28	Remove rear apron protector and antistatic film.

Filling from AdBlue® bottles

29	Remove cover from AdBlue® bottle and screw AdBlue® bottle finger-tight onto filler neck (2) of AdBlue® tank (1).

30	Press AdBlue® bottle onto filler neck (2) of AdBlue® tank (1) and fill AdBlue® tank (1).

 Repeat process if necessary using further AdBlue® bottles. No further AdBlue® will flow when the AdBlue® container (1) is full.

31	Unscrew AdBlue® bottle from filler neck (2) of AdBlue® tank (1) and dispose of empty AdBlue® bottles in an environmentally friendly manner.

32	Attach cap to filler neck (2) of AdBlue® tank (1) and remove AdBlue® residues using appropriate means.

 Use only clean, lint-free rags to avoid contaminating the emission control system.
Failure of the emission control system can occur otherwise.

33	Remove rear apron protector and antistatic film.