Remove/install SCR AdBlue pressure sensor

AR14.40-B-2003A

Remove/install SCR AdBlue pressure sensor

23.10.2019

Engine

924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2

Engine

926.9 in model 368, 382.17/18, 384.0

1

Metering unit

3

Electric plug

4

AdBlue SCR pressure sensor (17B05)

2

O-ring

 

Remove/install

 Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Turn off ignition

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

2

Open the access cover

3

Detach the electric plug (3) from the AdBlue pressure sensor (17B05) (4)

4

Remove the AdBlue pressure sensor (17B05) (4)

 .AdBlue pressure sensor SCR on dosage unit

*BA14.40-B-1006-02B

5

Install in reverse order

 Exhaust gas after-treatment

Number

Designation

Engine 924.9, 926.9 except Liquid Only

BA14.40-B-1006-02B

AdBlue pressure sensor SCR on dosage unit

Nm

30