Remove/install housing for exhaust gas recirculation valve

AR14.20-D-7666SF

Remove/install housing for exhaust gas recirculation valve

24.10.06

 

Remove/install

1

Drain coolant

AR20.00-D-1140SD

2

Remove fan shroud

AR20.40-D-6800SF

3

Detach coolant hoses (5) at exhaust gas recirculation positioner (Y27/11))

4

Remove bolts (2, 3, 4)

5

Remove housing (1) until the electrical connector (6) is reachable

6

Disconnect electrical connector (6)

7

Install in the reverse order



Check

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns from working on the vehicle as it is being started or when the engine is running

Secure vehicle to prevent it from starting off by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Test run engine and check leaktightness in the area of housing (1)