AR14.15-W-6302C | Remove/install engine brake valve fitting | 18.12.07 |
ENGINES 542.9 in MODEL 950, 952, 954
W14.15-1012-11
1 Compressed-air line
2 Engine brake valve connection
3 Exhaust pipe
| Remove/install | ||
| Notes on self-locking nuts and bolts | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
1 | Tilt cab | ||
| Notes on tilting the cab | ||
2 | Remove soundproofing sideways to the left and to the rear | ||
3 | Disconnect compressed-air line (1) from engine brake cylinder | ||
4 | Detach exhaust pipe (3) at engine brake valve fitting (2) | ||
5 | Detach transverse exhaust pipe at engine brake valve fitting ( | | |
6 | Remove engine brake valve fitting (2) on turbocharger | | |
7 | Remove engine brake valve fitting (2) | Installation: Clean sealing surfaces. | |
8 | Install in the reverse order |
Exhaust manifold