Remove/install engine brake valve fitting

AR14.15-W-6302B

18.12.07

ENGINES 541.9 in MODEL 950, 952, 953, 954

W14.15-1006-06

1 Engine brake valve connection

2.1 Screening

2.2 Screening

2.3 Clamp

2.4 Screening

2.5 Screening

3 Exhaust pipe

4 Compressed-air line

 	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.	AS60.80-Z-0001-01A
1	Tilt cab
	Notes on tilting the cab		AH60.80-N-0003-01A
2	Remove soundproofing sideways to the left and to the rear
3	Disconnect compressed-air line (4) from engine brake cylinder
4	Detach exhaust pipe (3) on engine brake valve fitting (1)
5	Remove engine brake valve fitting (1) on turbocharger		*BA14.10-N-1002-01C
6	Remove engine brake valve fitting (1)	 Installation: Clean sealing surfaces.
7	Remove shielding (2.1, 2.2) or shielding (2.4, 2.5) from engine brake valve fitting (1)	 Only when replacing the engine brake valve fitting (1).
		 Installation: Replace clips (2.3).
			*BA14.10-N-1011-01C
8	Install in the reverse order

 Exhaust manifold

Number	Designation		Engine 541.9


BA14.10-N-1002-01C	Nut, exhaust pipe engine brake valve fitting to turbocharger	Nm	50
BA14.10-N-1011-01C	Shielding bolt to exhaust pipe engine brake valve fitting	Nm	20