AR14.10-W-3920A | Remove/install exhaust plenum chamber | 8.10.96 |
ENGINE 541.9## ## up to 064475 in MODEL 950, 952, 953, 954
W14.10-1004-12
1 Exhaust pipe
3.1 Exhaust manifold
6 Exhaust pipe
9.1 Support
13.1 Shielding
14 Clamp
| Remove/Install | ||
| Notes on self-locking nuts and bolts | ||
1 | Remove turbocharger | ||
2 | Remove soundproofing on frame at top left, right and rear | ||
3 | Detach exhaust pipes (1, 6) at the exhaust collector (3.1) and at both exhaust manifolds | | |
| |||
4 | Remove support ( or 9.1) at timing case and at exhaust plenum chamber (3.1) | | |
| |||
5 | Detach exhaust plenum chamber (3.1) at timing case | | |
6 | Take off screening (13.1) at exhaust plenum chamber (3.1) | Only when replacing the exhaust collector (3.1). | |
Installation: Replace clips (14). | |||
7 | Install in the reverse order |
Exhaust manifold
Number | Designation | Engine 541.9 | ||
BA14.10-N-1003-01C | Nut of exhaust pipe to exhaust plenum chamber | Nm | 50 | |
BA14.10-N-1004-01C | Bolt of exhaust plenum chamber to timing case | M16 | Nm | 150 |
M12 | Nm | 100 | ||
M10 | Nm | 50 | ||
BA14.10-N-1005-01C | Nut of exhaust pipe to exhaust manifold | Nm | 50 | |
BA14.10-N-1008-01C | Bolt of support to exhaust plenum chamber | Nm | 40 | |
BA14.10-N-1009-01C | Bolt of support/exhaust plenum chamber to timing case | Nm | 40 | |