Shown on model 177 |
1 | Tensioning device |
2 | Bolts |
3 | Poly-V-belt |
P13.25-2086-05
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Remove poly-V-belt (3). | ||
2 | Remove right engine mount. | ||
3 | Remove screws (2). | Bolt, tensioning device to timing case cover | |
4 | Remove tensioning device (1). | ||
5 | Check tensioning device (1) for damage, wear and contamination. | If there are problems, | |
| |||
Replace clamping device(1). | |||
6 | Install in the reverse order. |