Remove/install poly-V belt

AR13.22-P-1202MRH

01.02.2019

Engine	264 in model 213, 238, 257
	except code B01 (48V technology)

1	Poly-V-belt
2	Multi-tooth pin
3	Tensioning device

P13.22-A000-06

 Warning	Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
	Remove
1	Remove charge air cooler.		AR09.41-P-6817MRH
2	Turn tensioning device (3) at multi-tooth pin (2) counterclockwise and lock with suitable assembly pin.
3	Remove poly-V-belt(1).
	Check
4	Check poly-V-belt (1) for damage.
			AP13.22-P-1351-01A
		If damage is present,
		
		Replace poly-V-belt (1).
5	Check tensioning device (3) for damage.	If damage is present,
		
		Replace clamping device (3).
			AR13.25-P-3220MRL
6	Check belt pulley for damage.	If damage is present,
		
		Replace belt pulley.
			AR03.30-P-1700MRH
7	Check belt pulley of the alternator for damage.	If damage is present,
		
		Replace alternator belt pulley.
8	Check belt pulley of the refrigerant compressor for damage.	If damage is present,
		
		Replace refrigerant compressor.
			AR83.55-P-5310MRH
	Install
9	Mount poly-V-belt (1).		AR13.22-P-3902-02MRH
		 Do not use belt wax or similar products. This leads to slipping of poly-V-belt(1).
10	Turn tensioning device (3) at multi-tooth pin (2) slightly counterclockwise, remove assembly pin and tension poly-V-belt (1) with tensioning device (3).
11	Install charge air cooler.		AR09.41-P-6817MRH
 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
12	Perform an engine test run and check the engine for proper function.

เอกสารที่อ้างถึง