Remove, install poly V-belt

AR13.22-P-1202GF

12.4.06

ENGINE 166.940 /960 /990 /995, 668.940 /941 /942 in MODEL 168

P13.22-0249-06

1.1 Poly V-belt (with AC compressor)

1.2 Poly V-belt (without refrigerant compressor)

2 Tensioning pulley

3  Assembly lever

	Remove
1	Loosen poly V-belt (1.1) or (1.2) and take off	 Swivel tensioning pulley (2) in clockwise direction with assembly lever (3) for this step  Do not allow poly V-belt to come into contact with products containing oil	*166589000300
	Check
2	Inspect belt pulley sections and tensioning device for damage and dirt	 Replace any damaged components
3	Inspect poly V-belt (1.1) or (1.2)
	Check poly-V-belt in visible area for wear		AP13.22-P-1352Z
		Replace poly V-belt (1.1) and (1.2) if necessary following inspection 
		Engine 166.940940/960/ 960/ 990/ 995990/995	*BE13.22-P-1001-01G
		Engine 668.940 /940/941	*BE13.22-P-1001-01H
	Install
4	Use wrench (3) to fit on poly V-belt (1.1) or (1.2) according to running diagram	Routing diagram of poly V-belt	AR13.22-P-3902-02GF
		 The assembly lever (3) has a feeder at the rear end.
		 Swivel tensioning pulley (2) in clockwise direction with assembly lever (3)	*166589000300

Test values for single-belt drive

Number	Designation		Engine 166.940/960/ 990/995 without A/C compressor	Engine 166.940/960/ 990/995 with A/C compressor


BE13.22-P-1001-01G	Length of poly V-belt	mm	12905	17505

Test values for single-belt drive

Number	Designation		Engine 668.940/ 941/942 without AC compressor	Engine 668.940/941/942 with AC compressor


BE13.22-P-1001-01H	Length of poly V-belt	mm	1270 ()5	1720 ()5

Assembly lever

166 589 00 03 00