1 | Poly-V-belt |
2 | Poly-V-belt |
3 | Tensioning device |
4 | Tensioning device |
5 | Belt pulley |
6 | Screw |
7 | Bracket |
G13.22-3112-75
| Remove/install | ||
1 | Tilt cab into repair position | ||
2 | Remove drive shaft from belt pulley (5) | Propeller shaft to engine belt pulley | |
3 | Swivel and hold tensioner pulley (4) with breaker bar and socket downwards | ||
4 | Remove poly-V belt (2) while not tilting the poly-V belt (2) | Installation: Ensure that poly-V belt (2) is seated correctly. | |
5 | Swivel back tensioner pulley (4) | ||
6 | Remove screw/bolt (6) and bracket (7) of guide pulley | Installation: Align guide pin on holder (7) to housing bore. | |
Guide pulley to crankcase | |||
7 | Swivel and hold tensioner pulley (3) with breaker bar and socket downwards | ||
8 | Remove poly-V belt (1) while not tilting the poly-V belt (1) | Installation: Ensure that poly-V belt (1) is seated correctly. | |
9 | Swivel back tensioner pulley (3) | ||
| Check | ||
10 | Check poly-V belt (1, 2) for wear and damage | ||
| Damage profiles for a poly-V belt | ||
11 | Check belt pulley, vibration damper and tensioning devices of tensioner pulleys (3, 4) for damage | If there are problems: | |
| |||
Replace damaged or worn parts. | |||
12 | Install in the reverse order |