Remove/install poly-V belt

AR13.22-G-1202DD

21.08.2019

Engine	900.91/92 in model 000.001
Engine	902.91/93 in model 000.001
Engine	904.94/95/96/97 in model 000.001
Engine	906.90/93/94/95/96/98/99 in model 000.001
Engine	924.91/93/94 in model 000.001
Engine	925.9 in model 000.001
Engine	926.91/92/93/95/97/98 in model 000.001

Modification notes

25.03.2019

Document completely revised

Shown on engine 904.9

1	Tensioner pulley
2	Breaker bar and socket
3	Poly-V-belt
A	Pivot direction

W13.22-0004-06

 Danger	Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.	Remove any sources of ignition. Protective clothing, safety gloves and safety glasses must always be worn. Ensure that the work area is adequately ventilated. When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.	AS00.00-Z-0018-01A
 Warning	Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension	Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.	AS00.00-Z-0001-01A
	Notes on work safety regulations for vehicles with natural gas-powered engines		AH00.10-N-1000-04A
	Remove
1	Swivel tensioner pulley (1) with breaker bar and socket wrench socket (2) upwards in swivel direction (A) and hold.	 Only swivel clamping device against the spring tension of the tensioner pulley (1). Screw can otherwise detach.
2	Remove poly-V-belt (3) from tensioner pulley (1).
3	Swing back tensioning device and remove poly-V-belt (3).	 Do not kink poly-V-belt (3). This will otherwise be damaged.
	Check
4	Check condition of the poly-V-belt (3).
	Damage profiles for a poly-V belt		AP13.22-D-1351-01A
		If damage is determined or wear lies outside the tolerance,
		
		Replace poly-V-belt (3).
5	Check vibration damper, belt pulleys of alternator and coolant pump as well as tensioning device with tensioner pulley (1).	If damage is determined or wear lies outside the tolerance,
		
		Replace damaged or worn parts.
		Belt pulley/vibration damper	AR03.30-G-1600DD
		Remove/install alternator belt pulley	AR15.40-G-5710DD
		Poly-V belt tensioning device	AR13.25-G-3200DD
		Coolant pump	AR20.10-G-1271DD
	Install
6	Mount poly-V-belt (3) on belt pulleys and vibration dampers.	Routing diagram for poly-V belt	AR13.22-G-3902-02DD
		 Do not yet mount poly-V-belt (3) on tensioner pulley (1). Observe the routing diagram.
7	Swivel tensioner pulley (1) with breaker bar and socket wrench socket (2) upwards in swivel direction (A) and hold.	 Only swivel clamping device against the spring tension of the tensioner pulley (1). Screw can otherwise detach.
8	Mount poly-V-belt (3) on tensioner pulley (1) and swing back tensioning device, remove breaker bar and socket wrench socket (2).
9	Check that poly-V-belt (3) is correctly seated.	If not correctly seated,
		
		align poly-V-belt (3).

เอกสารที่อ้างถึง