W13.21-1034-09
1 | Poly-V-belt | 6 | Fan shroud | |
5 | Fan |
2 | Electrical connector |
3 | Screw |
4 | Support |
5 | Fan |
6 | Fan shroud |
W13.21-1035-06
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
Topical note | Notes and information on working on air compressor, belt drives | ||
| Remove/install | ||
1 | Tilt cab | ||
2 | Remove soundproofing below the engine | ||
3 | Remove soundproofing on frame at the left | ||
4 | Disconnect electrical connection (2) | ||
5 | Remove bolt (3) of support (4) | Screw/bolt, support clamp to bracket | |
6 | Slacken poly-V-belt (1), take off and remove between fan (5) and fan shroud (6) | ||
| Damage profiles for a poly-V belt | ||
Routing diagram | |||
Installation: Observe the routing diagram. | |||
If worn or damaged. | |||
| |||
Replace poly-V-belt (1). | |||
7 | Install in the reverse order |