1 | Poly-V-belt |
2 | Screw |
3 | Tensioning device |
P13.20-A001-06
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
| Remove/install | ||
1 | Remove charge air coolers. | ||
2 | Remove poly-V-belt (1). | ||
3 | Remove screws (2) and remove clamping device (3). | Bolt, belt tensioner to left bracket | |
| Check | ||
4 | Check tensioning device (3) for damage. | If there is a problem, | |
| |||
Replace clamping device (3). | |||
5 | Install in the reverse order. |