1 | Air intake hose |
2 | Air intake hose |
3 | Resonator |
4 | Screw/bolt |
W09.20-1005-11
Danger ! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
| Notes on self-locking nuts and bolts | ||
| Notes on tilting the cab | ||
| Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Tilt cab | ||
2 | Remove soundproofing | ||
3 | Remove air intake hoses (1, 2) on resonator (3) | Installation: Check sealing rings in the air intake hoses (1, 2) for damage; replace air intake hoses (1, 2) if necessary. | |
4 | Remove screws/bolts (4) | Bolts, resonator to rocker arm frame, charge air housing and timing case | |
5 | Remove resonator (3) | ||
6 | Install in the reverse order |