W09.41-1063-09
Shown on engine 471.9 |
1 | Charge air pipe | 3 | Soundproofing panel | ||||
2 | Charge air hose | 4 | Bracket |
Shown on engine 470.9 with code M8A (Air intake, from the front) and code F2M (Cab, 420 mm attachment height |
1 | Charge air pipe |
2 | Charge air hose |
5 | Charge air hose |
6 | Charge air pipe adapter |
W09.41-1077-05
Danger ! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
| Notes on self-locking nuts and bolts | ||
| Notes on avoiding damage through contamination and foreign objects | ||
| Notes on tilting the cab | ||
| Remove/install | ||
1 | Tilt cab | ||
2 | Remove soundproofing (3) | ||
3 | Remove charge air hose (2) on charge air pipe (1) or on charge air pipe adapter (6) | Clamp, charge air hose to charge air pipe and charge air cooler | |
4 | Remove charge air hose (5) on charge air pipe (1) and remove together with charge air pipe adapter (6) | Only for vehicles with code M8A (Air intake, from the front) | |
Clamp, charge air hose to charge air pipe and charge air cooler | |||
Nut, charge air pipe adapter to frame | |||
5 | Remove charge air pipe (1) | Installation: Replace O-ring. | |
Clamp, charge air pipe to turbocharger | |||
Bolt, charge air pipe to bracket | |||
6 | Install in the reverse order |