Engine | 900.9 in model 375.1, 970, 972, 975, 976 |
Charge air pipe from charge air cooler to charge air distributor | |
Engine | 902.9 in model 375.1, 970, 972, 974, 975, 976 |
Charge air pipe from charge air cooler to charge air distributor | |
Engine | 902.9 in model 375.3, 950.5/6, 952.5/6, 953.6, 954.5 |
Charge air pipe from charge air cooler to charge air distributor | |
Engine | 924.9 in model 958.0, 970, 972, 974, 975, 976 |
Charge air pipe from charge air cooler to charge air distributor | |
Engine | 925.9 in model 970, 972, 974 |
Charge air pipe from charge air cooler to charge air distributor | |
Engine | 926.9 in model 950.5/6, 952.5/6, 953.6, 954.5, 958.2 |
Charge air pipe from charge air cooler to charge air distributor | |
Engine | 926.9 in model 958.0 |
Charge air pipe from charge air cooler to charge air distributor |
W09.41-1039-09
Shown on engine 924.9 with code MS4 (BlueTec 4 (Euro IV)) |
1 | Charge air pipe (from charge air cooler to charge air distributor) | 6 | Compressor air intake hose | 9 | Charge air distributor | ||
3 | Charge air hose, black | 7 | O-ring | 10 | Screw | ||
4 | Clip | 8 | Clip | 11 | Screw |
Shown on engine 926.9 with code MS4 (BlueTec 4 (Euro IV)) |
1 | Charge air pipe (from charge air cooler to charge air distributor) |
2 | Electrical wiring harness (only for model 950, 952, 953, 954, 958) |
3 | Charge air hose, black |
4 | Clip |
5 | Screw |
6 | Compressor air intake hose |
7 | O-ring |
8 | Clip |
9 | Charge air distributor |
W09.41-1036-06
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on tilting the cab | ||
| Remove/install | ||
1 | Tilt cab | ||
2 | Remove soundproofing on top right of frame | ||
3 | Remove fuel lines and electrical lines for flame starting system | Only for vehicles with code M89(FLA). | |
Collect escaping fuel. | |||
4 | Detach black charge air hose (3) on charge air pipe (1) | Clamp, charge air hose to charge air manifold/charge air pipe and charge air cooler | |
5 | Remove air intake hose for compressor (6) from charge intake pipe (1) | Only for vehicles with code MS4 (BLUETEC 4 (Euro IV)) or code MS5 (BLUETEC 5). | |
6.1 | Remove screw/bolts (10, 11) | ENGINE 900.9, 924.9 | |
Nut, charge air pipe to charge air pipe | |||
Bolt, charge air pipe to alternator carrier | |||
6.2 | Remove screw/bolt (5) | Engine 902.9, 925.9, 926.9 | |
7 | Expose electrical wiring harness (2) on bracket the charge air pipe (1) | Only in model 950, 952, 953, 954, 958. | |
8 | Remove charge air pipe (1) | Sequence for installation of the charge air pipes | |
Close off opening on charge air distributor (9). | |||
Installation: Clean sealing surfaces and replace O-ring (7). | |||
9 | Install in the reverse order |
Charge air pipe/charge air cooling |
Number | Designation | Engine 900.9 in model 375, 970, 972, 975, 976 | Engine 902.9 in model 375, 950, 952, 953, 954 | |
BA09.41-N-1010-01B | Clamp, charge air hose to charge air manifold/charge air pipe and charge air cooler | Nm | 8 | 8 |