Remove/install charge air cooler

ประเภท ar · หัวข้อ 09.41 · เวอร์ชัน 0105 · 2007-01-09

ใช้กับ: ENGINE 611.962 in MODEL 203.004 /006 /204 /206 ENGINE 612.962 in MODEL 203.016 /216 ENGINE 612.967 in MODEL 209.316 ENGINE 646.966 in MODEL 209.308

ไม่มีใน “th” แสดงเป็น อังกฤษ

AR09.41-P-6817PP

7.12.06

ENGINE 611.962 in MODEL 203.004 /006 /204 /206

ENGINE 612.962 in MODEL 203.016 /216

ENGINE 612.967 in MODEL 209.316

ENGINE 646.966 in MODEL 209.308

P09.41-2046-06

10 Lug

110/2 Charge air cooler

110/5 Charge air hoses

110/9 Air scoop

110/11 Sealing rings

P09.41-2301-04

1 Cover for dryer cartridge

2 Expansion clips

 	Remove/install
1	Remove bottom sections of soundproofing		AR94.30-P-5300P
2	Remove front bumper	Model 203 except model 203.076/276	AR88.20-P-2000P
		Model 203.076/276, 209	AR88.20-P-2000Q
3	Detach charge air hoses (110/5) at charge air cooler (110/2)	 Check sealing rings (110/11); replace if necessary. Thoroughly clean connection points, do not grease. Ensure locking springs are exactly located.
4	Unclip spreading clips (2) and fold down cover for desiccant cartridge (1)	Model 203, 209 as of 24.4.04
5	Unclip charge air cooler (110/2) at bottom of radiator (arrow)
6	Detach plates (10) of charge air cooler (110/2) from radiator sleeves
7	Remove charge air cooler (110/2)
8	Remove air scoop (110/9)	 Only when replacing the charge air cooler (110/2).
9	Install in the reverse order

Remove/install charge air cooler

เอกสารที่อ้างถึง