Charge air pipe/charge air cooling
Number | Designation | Engine | ||
BA09.41-N-1010-01O | Bolt, charge air distribution line to cylinder head | Nm | 16 | |
Flexible head wrench set
001 589 81 09 00
D09.41-1163-12
Shown on engine 642.896
1 Screw all bolts (1 to 19) finger-tight to charge air manifold (20), except bolts (2 and 11).
Screw on lifting eye (22) when screwing on bolts (7 and 10)
2 Remove clamp (21) from charge air manifold (20).
3 Tighten bolts (1 to 19) according to bolt plan, start with bolt (1).
Observe tightening torque.
4 Tighten bolts (1 and 11) again..
Observe tightening torque.